water on wood deck. When water soaks into the wood instead of beading up, it's time to seal or stain it. It's important to finish typical pressure-treated wood as soon as project could be ready in less time depending on factors like weather conditions and how long the material was in the lumber yard before you purchased it.

Nov 1, 1994 Because your treated wood has weathered for so long, I suggest you give the wood a good scrubbing with a stiff-bristle brush, detergent and water. Be sure to rinse thoroughly and then let the wood dry for two days. For the handrails and spindles of your porch, I suggest a stain-blocking acrylic latex primer

Never had good luck painting. Staining so so. I would let it weather a year before trying and then use the best primer you can get. February 13, 2014 at 7:12 am #90030 · ChadM. Moderator. East Palestine, Ohio. I have used Sherwin Williams exterior oil based wood primer and SW Duration paint on treated

There are some people who believe you have to wait and entire season or 1 year before you can stain new wood. This is normally not If the water soaks in right away indicating the wood is dry it is probably okay to stain. My new deck has the "HT" Heat Treated Thermally modified wood for planking and railings . The rest

Try Defy Extreme or Armstrong Clark stains. One Time as issues as you will see from our review and comments from consumers: https: www.deckstainhelp.com one-time-wood-deck-stain-review . Reply. 3 months 3 days ago. Ryan in Colorado. I live in Colorado Springs and just built a pressure treated pine

Many people say you should wait at least six months before staining pressure treated wood. The deck is right beside the screened-in porch and you access the deck through a soon-to-be-door from the screened-in porch. How to Stain Wood the Easy Way {Lattice Refresh} via RainonaTinRoof.com #.

There seems to be an opinion among homeowners that is okay to stain new wood right away or even before the deck is installed. This is Doing a search for deck stain help can lead you to a mountain of information that will educate and prepare you for your deck staining project. Best Stain for New Pressure Treated Pine.

Q: How long should I wait before staining pressure-treated lumber? A: It depends on a couple of things. The first is the type of pressure-treated lumber you use. pressure-treated lumber has been dried after its pressure treatment to remove excess moisture. This lumber can be stained as soon as

Regular, unsealed wood usually dries within a few days, but pressure treated wood takes much longer to dry—either weeks or months, depending on what the wood is treated with. Painting the wood before it's dry will be a waste of time because the paint will peel away as the moisture pushes up underneath. Test the wood

Have you been hearing some questionable comments about how to stain your deck? Let us give you Warren is my husband so he can get away with the occasional comment like this. So maybe I like Myth Number 1 Pressure treated wood needs to breathe for at least three months before it is stained.

Look for a tag that says Thompsonized or ask the dealer if your lumber is this type. If you buy this type, make sure you use an oil-based exterior stain. A water-based stain won't adhere well, because of the repellent. Kiln-dried after treatment: Dry treated wood is ideal because you can confidently stain it right away with either

Hello Jake,. Years ago the pressure treating process injected much more moisture into the wood and the recommended wait time before staining was 90-days. Today, the process injects considerably less moisture and the wait time has been reduced to 30-days. But if you have any doubt, tap the tip of a nail

Some stain manufacturers suggest you should wait 3-12 months to let the wood dry while others say to stain the deck right away. The answer can be both just as long as you prep the new wood properly for an application of the stain. . New pressure-treated deck made of pine.installed and finished first week of August.

Take your time and allow new, pressure treated-lumber to weather for a few months and dry out before staining it. Leave stain of wood stain. So stay away from the cheap stuff if you expect it to last. It only takes a few minutes and it will ensure that you have all of the right information before you start. Pay attention to how

With newly installed treated lumber, it is necessary to wait an adequate period of time for the wood to season or dry out prior to staining it with TWP. To avoid having to wait months to stain your new wood you can use KDAT wood instead. This cuts down significantly on the wait time and may be the right option for you.

The boards on my back deck run from not good to quite bad, so they are all being replaced with pressure-treated 2x6s. Right now the whole deck and railings have solid stain on them. I plan to Some people say I can paint the new boards right away, and some say to let them dry for a few months first.